| Hardening Time | Coverage/ Consumption | Layer Thickness | Water Consumption | Tensile Adhesion 7 Days:N | Tensile Adhesion 14 Days:N | Shear Adhesion KN | Pot Life | Open Time | Adjusta- bility Time | Grouting |
|---|---|---|---|---|---|---|---|---|---|---|
| Approx. 48 Hours | Approximately 3 Kg/m² Depending on the size of tiles | Up to 3 mm | Approximately 1.4 litres water /5 Kg. | Dry Condition : 450 | Dry Condition : 660 | Dry Condition : 14 Days : 8.0 | Approx 60 Minutes | >= 20 Minutes | >= 20 Minutes | After 8 hr on Walls & 24 hrs on floor |
| Wet Condition : 250 | Wet Condition : 390 | Heat Aging Condition : 4.00 | ||||||||
| Wet Condition : 5.00 |
| Hardening Time | Coverage/ Consumption | Layer Thickness | Water Consumption | Tensile Adhesion 7 Days:N | Tensile Adhesion 14 Days:N | Shear Adhesion KN | Pot Life | Open Time | Adjusta- bility Time | Grouting |
|---|---|---|---|---|---|---|---|---|---|---|
| Approx. 48 Hours | 3 to 12 Kg/m2 Depending on the size of tiles | Up to 12 mm | Approximately 1.4 litres water /5 Kg. | - | - | Dry Condition : 14 Days : 12 | Approx 60 Minutes | >= 30 Minutes | >= 30 Minutes | After 8 hr on Walls & 24 hrs on floor |
| - | - | Heat Aging Condition : 6.00 | ||||||||
| Wet Condition : 9.00 |
| Paste Density | 1.72 gm/cc |
| Pot Life | 45 Minutes |
| Time to walk on grouted floor | 24 hours after grouting |
| Recommended tile joint width | 2-12 mm |
| Hardening time (grout) | 4-8 hours |
| Ph | 10-11 |
| Compressive strength at 7 days | >50 Mpa |
| Shear strength at 7 days | >9 Mpa |
| Flexural strength at 7 days | >25 Mpa |
| Tensile adhesion stength at 7 days | >15 Mpa |
| Property | Typical results climax putty (mf) |
| Tensile adhesion strength 28 days | > 2.10 n/mm |
| Setting time: | Initial: 150 min / Final: < 500 min |
| Compressive strength 28 days | > 9.0 |
| Coverage | 12-15 sq ft/kg @ 2 mm thickness |
| Pot life | 100 -120 min |
| Water requirement by volume | 35-40% |